Osman Bodur
Portrait of Osman Bodur

Dr.techn. Osman Bodur, MSc.

Senior Scientist | R&D Project Manager

Institute of Production Engineering and Photonic Technologies, TU Wien

Research

Manufacturing metrology

Measuring manufactured parts down to the micrometre, and turning those measurements into decisions about tolerances, processes and quality.

Overview

Manufacturing metrology answers a simple question with a lot behind it: does the part match its drawing? I work with computed tomography, coordinate measuring machines, laser interferometry, confocal and focus-variation microscopy and 3D scanning to capture dimensions, form and surface texture, from machined components to miniaturised gears and medical parts.

The second half of the question is the drawing itself. Geometrical Product Specification (ISO GPS) defines how tolerances are written and how they must be verified. I use it as the common language between design, manufacturing and inspection, teach it at TU Wien and serve on an Austrian Standards committee.

Measurement only pays off when it feeds back into production: statistical process control, computer-aided quality assurance and measurement data that travel with the part.

Topics

  • Dimensional and geometrical measurement with computed tomography and coordinate measuring machines
  • Surface texture and roughness parameters such as Ra, Rq and Rz
  • ISO GPS, tolerancing and verification
  • Quality assurance, statistical process control and computer-aided quality
  • Metrology for additively manufactured and miniaturised parts

Try it

Illustrative roughness profile: Ra 0.80 µm, Rz 4.39 µm over 4 mm.

Move the stylus along the profile to read position and height. Ra is the arithmetic mean of the absolute height deviations from the mean line. Rq is their root mean square. Rz is the mean of the largest peak-to-valley heights in five sampling lengths.

Questions

What is the difference between Ra and Rz?
Ra averages all deviations of a profile from its mean line, so a single scratch barely changes it. Rz takes the highest peak and the deepest valley in each sampling length and averages those values, so it reacts to outliers. Two surfaces with the same Ra can have very different Rz.
Why measure 3D-printed parts with computed tomography?
Computed tomography looks inside a part without cutting it. Internal channels, lattice structures and porosity can be measured in one scan, together with the outer geometry.

Related projects

  • HDrawing

    Hybrid training practices in technical drawing teaching, with augmented and virtual reality.

    Erasmus+ KA220-VET, project manager

    Ongoing 2024 - 2027

Publications on this topic 18

2026
Influence of drilling parameters on hole quality in the aluminum alloy AA6013-T651 Özsoy, N., Akşen, T. A., Bodur, O., Poszvek, G. and Özsoy, M. Materials Testing, 68(7), 1296-1310. PDFDOI 10.1515/mt-2026-0025reposiTUmCited by 2
2026
Engineering Graphics Literacy and Manufacturing Performance: A Cross-National Mixed-Methods Study of CAD Competency Gaps, Standards Compliance Deficiencies, and Their Industrial Consequences Sarıkaya, M., Karabulut, Ş., Bodur, O., Okyayuz, A. Ş., Boztunç Öztürk, N. and Dağlı, S. Applied Sciences, 16(10), 4771. PDFDOI 10.3390/app16104771reposiTUmCited by 1
2026
Evaluation of Dimensional Precision in FDM 3D-Printed Parts via Computed Tomography Craciun, R., Maxim, A., Muresan, V., Bodur, O., Walcher, E. M. and Poszvek, G. Acta Technica Napocensis, Series Applied Mathematics, Mechanics, and Engineering, 60(II). reposiTUm
2026
Integrated Study of Surface Roughness Parameters and Dimensional Accuracy in FDM 3D-Printed Rakos, P. G., Dan, I.-M., Walcher, E., Bodur, O. and Poszvek, G. Acta Technica Napocensis, Series Applied Mathematics, Mechanics, and Engineering, 69, 615-629. reposiTUm
2026
Microscopic Fiducial Markers for Industrial Metrology Applications Bleicher, F., Nacu, C., Bodur, O. and Poszvek, G. Acta Technica Napocensis, Series Applied Mathematics, Mechanics, and Engineering, 69, 397-403. reposiTUm
2025
Hybrid Predictive Modelling of Surface Roughness in DMLS AlSi10Mg: Integrating Thermo-Mechanical Simulation and Optical Metrology on ISO 10791-7 Components Bodur, O., Kossik, P., Poszvek, G. and Bleicher, F. Proceedings of the 13th UTIS International Congress on Machining, pp. 1-12. reposiTUm
2025
Quality in Production and Service Bodur, O., García, Á. M., Poszvek, G. and Durakbasa, N. M. Sustainable Green Conversion: Selected Papers from ISPR2024, Springer, pp. 509-531. DOI 10.1007/978-3-031-83583-4_36reposiTUmCited by 2
2025
Seminar für Fertigungsmesstechnik und Qualitätssicherung FQS2025 Bleicher, F., Bodur, O., Poszvek, G. and Trautner, T. F. Conference presentation, FQS2025, Vienna, 18 March 2025. reposiTUm
2024
Advanced Quality Assurance of Additive Manufacturing Through Computed Tomography Jałowiec, M., Walcher, E. M., Bodur, O., Poszvek, G., Klein, M. and Bayrakçıl, M. D. Industrial Engineering in the Industry 4.0 Era: Selected Papers from ISPR2023, Springer, pp. 179-199. DOI 10.1007/978-3-031-53991-6_14reposiTUmCited by 3
2024
Characterization of Polyethylene Pipe Properties Through Advanced Metrology Techniques Bayrakçıl, M. D., Bodur, O., Klein, M., Walcher, E. M., Poszvek, G. and Jałowiec, M. Industrial Engineering in the Industry 4.0 Era: Selected Papers from ISPR2023, Springer, pp. 97-115. DOI 10.1007/978-3-031-53991-6_8reposiTUmCited by 1
2023
Quality Assurance of Composite Grinding Bodur, O., Walcher, E. M., Brier, J., Krall, S., Bleicher, F., Sterca, A., Sauprigl, J. and Peherstorfer, H. Procedia CIRP, 118, 590-595, 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering. PDFDOI 10.1016/j.procir.2023.06.101reposiTUmCited by 2
2023
Generative design, evaluation and validation of additive miniaturized-manufactured components, based on GPS and quality standards, by high precision measurement technologies Bodur, O. Doctoral dissertation, TU Wien. PDFDOI 10.34726/hss.2023.113420reposiTUm
2022
Improving the Precision of an FDM 3D Printer with Compensation Technique Bodur, O., Sterca, D.-A., Sulz, C. and Walcher, E. M. Smart and Networked Manufacturing, Vol. 5, ed. F. Bleicher, pp. 109-113. reposiTUm
2021
Evaluation of Fused Deposition Modeling Process Parameters Influence on 3D Printed Components by High Precision Metrology Sterca, D.-A., Calin, R.-A., Cristian, L., Walcher, E. M., Bodur, O., Ceclan, V., Grozav, S. D. and Durakbasa, N. M. Digitizing Production Systems, Springer, pp. 281-295. DOI 10.1007/978-3-030-90421-0_24reposiTUmCited by 5
2020
Precision in Additive Manufacturing, Optimization and Evaluation of the Accuracy of 3D Printer based on GPS System Bodur, O., Stepanek, V., Walcher, E. M. and Durakbasa, N. Proceedings of the 31st DAAAM International Symposium, DAAAM International, pp. 963-972. PDFDOI 10.2507/31st.daaam.proceedings.134reposiTUmCited by 12
2020
Intelligent Design and Advanced Precision Metrology on the Geometrical Structure of Medical Needles Based on GPS and ISO Standards Bodur, O., Poszvek, G., Walcher, E. M., Durakbasa, N. M. and Bauer, J. M. Digital Conversion on the Way to Industry 4.0, Springer, pp. 346-362. DOI 10.1007/978-3-030-62784-3_29reposiTUmCited by 3
2019
Additive Miniaturized-Manufactured Gear Parts Validated by Various Measuring Methods Durakbasa, M. N., Demircioglu, P., Bauer, J. M., Bögrekci, I., Bas, G., Bodur, O. and Poszvek, G. Proceedings of the 12th International Conference on Measurement and Quality Control: Cyber Physical Issue, Springer, pp. 276-290. DOI 10.1007/978-3-030-18177-2_25reposiTUmCited by 10
2019
Challenges of Miniaturizing a Precision Gear Durakbasa, M. N., Bauer, J. M., Bodur, O. and Poszvek, G. Proceedings of the International Symposium for Production Research 2018, Springer, pp. 239-253. DOI 10.1007/978-3-319-92267-6_21reposiTUmCited by 8
All 37 publications, talks and reports