Osman Bodur
Portrait of Osman Bodur

Dr.techn. Osman Bodur, MSc.

Senior Scientist | R&D Project Manager

Institute of Production Engineering and Photonic Technologies, TU Wien

Publications

37 publications, plus talks, posters and project reports. 19 entries link straight to an open-access PDF.

Citation metrics
Citation indexCitationsh-indexi10-indexAs of
Google Scholar926417 November 2026
OpenAlex705217 November 2026, updated weekly

Also indexed in Scopus, ORCID and reposiTUm. Counts differ between indexes because each covers different sources.

Journal articles 10

2026
Measurement-Driven Modeling of End-to-End Latency in an Indoor Private Standalone 5G Network Bodur, O., Çağlayan, S., Demir, N., Poszvek, G. and Bleicher, F. Network, 6(3), 78. PDFDOI 10.3390/network6030078reposiTUmDatasetCode on GitHub
2026
Integrating 5G-enabled mobile robotics for remote supervision in CNC machining via a virtualized framework Bodur, O., Badhan, T., Demir, N., Bhupathiraju, S. S. M. K. V., Spettel, S. and Bleicher, F. CIRP Journal of Manufacturing Science and Technology, 71, 698-710. PDFDOI 10.1016/j.cirpj.2026.10.008
2026
Interfacial wetting behavior, tribological integrity, and antifouling functionality of h-BN/FEP nanocomposite coatings on stainless-steel heat exchanger surfaces Dağlı, S., Özbey, M., Bodur, O. and Sarıkaya, M. Journal of Materials Research and Technology, 43, 2719-2733. PDFDOI 10.1016/j.jmrt.2026.06.267reposiTUm
2026
Influence of drilling parameters on hole quality in the aluminum alloy AA6013-T651 Özsoy, N., Akşen, T. A., Bodur, O., Poszvek, G. and Özsoy, M. Materials Testing, 68(7), 1296-1310. PDFDOI 10.1515/mt-2026-0025reposiTUmCited by 2
2026
Engineering Graphics Literacy and Manufacturing Performance: A Cross-National Mixed-Methods Study of CAD Competency Gaps, Standards Compliance Deficiencies, and Their Industrial Consequences Sarıkaya, M., Karabulut, Ş., Bodur, O., Okyayuz, A. Ş., Boztunç Öztürk, N. and Dağlı, S. Applied Sciences, 16(10), 4771. PDFDOI 10.3390/app16104771reposiTUmCited by 1
2026
Air pollution and meteorological factors significantly enhance solar radiation forecasting accuracy in the western Mediterranean region: a machine learning approach Yilmaz, I., Kocer, A., Bodur, O. and Aksoy, E. Frontiers in Energy Research, 14, 1807361. PDFDOI 10.3389/fenrg.2026.1807361
2026
Evaluation of Dimensional Precision in FDM 3D-Printed Parts via Computed Tomography Craciun, R., Maxim, A., Muresan, V., Bodur, O., Walcher, E. M. and Poszvek, G. Acta Technica Napocensis, Series Applied Mathematics, Mechanics, and Engineering, 60(II). reposiTUm
2026
Integrated Study of Surface Roughness Parameters and Dimensional Accuracy in FDM 3D-Printed Rakos, P. G., Dan, I.-M., Walcher, E., Bodur, O. and Poszvek, G. Acta Technica Napocensis, Series Applied Mathematics, Mechanics, and Engineering, 69, 615-629. reposiTUm
2026
Microscopic Fiducial Markers for Industrial Metrology Applications Bleicher, F., Nacu, C., Bodur, O. and Poszvek, G. Acta Technica Napocensis, Series Applied Mathematics, Mechanics, and Engineering, 69, 397-403. reposiTUm
2026
A Critical Review on Hybrid Metal Additive Manufacturing and Post-Processing: Nickel-Based Superalloys Sarıkaya, M., Başcıl, D., Yıldırım, Ç. V., Şirin, Ş., Çelik, M., Şirin, E., Bodur, O., Kıvak, T. and Dağlı, S. Journal of Materials Research and Technology. PDFDOI 10.1016/j.jmrt.2026.10.253

Conference papers 17

2026
Component-Driven Qualification of Recycled Polyamides for Additive Manufacturing in Automotive Lighting Bodur, O., Sarac, B., Kossik, P., Atılal, E., Ersözoğlu, G., Akyurt, H., Popp, R., Giray, T., Altun, F., Özkan, E. D. and Bleicher, F. 7th Wiener Produktionstechnik Kongress (WPK 2026), extended abstract, Vienna. PDFDOI 10.5281/zenodo.23110583
2025
Integrating 5G-Enabled Robotics for Remote Supervision in Smart Factories: A Virtualized Framework Bodur, O., Badhan, T. J., Bhupathiraju, S. S. M. K. V., Diaz, R., Wallner, B. J., Demirci, T., Spettel, S., Rotheneder, L., Belletti, R., Akkılıç, T. E., Nal, D., Egin, I. N., Poszvek, G. and Bleicher, F. Proceedings of the 13th UTIS International Congress on Machining, pp. 1-11. reposiTUm
2025
Hybrid Predictive Modelling of Surface Roughness in DMLS AlSi10Mg: Integrating Thermo-Mechanical Simulation and Optical Metrology on ISO 10791-7 Components Bodur, O., Kossik, P., Poszvek, G. and Bleicher, F. Proceedings of the 13th UTIS International Congress on Machining, pp. 1-12. reposiTUm
2025
Quality in Production and Service Bodur, O., García, Á. M., Poszvek, G. and Durakbasa, N. M. Sustainable Green Conversion: Selected Papers from ISPR2024, Springer, pp. 509-531. DOI 10.1007/978-3-031-83583-4_36reposiTUmCited by 2
2025
Towards Advanced Control of Manufacturing Cells Bleicher, F., Wallner, B. J., Habersohn, C., Bodur, O., Kügerl, L., Greitler, J.-A., Wurm, F., Badhan, T. J. and Trautner, T. F. Proceedings of the 13th UTIS International Congress on Machining, Antalya. reposiTUm
2025
Optimization and Performance Evaluation of a Patient-Specific Subperiosteal Implant from Ti6Al4V Willing, B., Bodur, O., Poszvek, G., Grozav, S. D., Păcurar, R., Ceclan, V. and Şelariu, M. Sustainable Green Conversion: Selected Papers from ISPR2024, Springer, pp. 55-67. DOI 10.1007/978-3-031-83611-4_5reposiTUm
2024
Evaluation of 3GPP Release 16 Indoor Positioning in Private Standalone 5G Networks Homayouni, S., Paier, M., Bodur, O., Pecherstorfer, M., Stangelmayer, G., Hohensulz, C., Schweeger, T. and Rehak, J. 2023 IEEE 20th International Conference on Smart Communities (HONET), IEEE, pp. 13-17. DOI 10.1109/HONET59747.2023.10375065reposiTUmCited by 8
2024
Advanced Quality Assurance of Additive Manufacturing Through Computed Tomography Jałowiec, M., Walcher, E. M., Bodur, O., Poszvek, G., Klein, M. and Bayrakçıl, M. D. Industrial Engineering in the Industry 4.0 Era: Selected Papers from ISPR2023, Springer, pp. 179-199. DOI 10.1007/978-3-031-53991-6_14reposiTUmCited by 3
2024
Characterization of Polyethylene Pipe Properties Through Advanced Metrology Techniques Bayrakçıl, M. D., Bodur, O., Klein, M., Walcher, E. M., Poszvek, G. and Jałowiec, M. Industrial Engineering in the Industry 4.0 Era: Selected Papers from ISPR2023, Springer, pp. 97-115. DOI 10.1007/978-3-031-53991-6_8reposiTUmCited by 1
2023
Porosity Examination of Additive Manufactured Parts and Effects of Infill Parameters Bodur, O., Walcher, E. M., Sterca, A., Sulz, C., Calin, R.-A., Durakbasa, N. M. and Bleicher, F. Procedia CIRP, 118, 643-648, 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering. PDFDOI 10.1016/j.procir.2023.06.110reposiTUmCited by 3
2023
Quality Assurance of Composite Grinding Bodur, O., Walcher, E. M., Brier, J., Krall, S., Bleicher, F., Sterca, A., Sauprigl, J. and Peherstorfer, H. Procedia CIRP, 118, 590-595, 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering. PDFDOI 10.1016/j.procir.2023.06.101reposiTUmCited by 2
2023
Study of Improving Spur Gears with the Generative Design Method Cristian, L.-N., Bodur, O., Walcher, E. M., Grozav, S. D., Ceclan, V., Durakbasa, N. M. and Sterca, D.-A. Towards Industry 5.0: Selected Papers from ISPR2022, Springer, pp. 473-485. DOI 10.1007/978-3-031-24457-5_38reposiTUmCited by 5
2023
Effects of Drag Finishing on a SLM-Manufactured Titanium Reconstruction Plate Tica, D., Cosma, C., Bodur, O., Durakbasa, N. M., Grozav, S. D., Ceclan, V., Rehor, J., Sterca, D.-A. and Walcher, E. M. Towards Industry 5.0: Selected Papers from ISPR2022, Springer, pp. 462-472. DOI 10.1007/978-3-031-24457-5_37reposiTUm
2023
Research on Mechanical Characteristics of Parts Made of 316L Stainless Steel (Material) by Using Selective Laser Melting Technology Kovacs, M., Pacurar, R.-I., Grozav, S., Durakbasa, N. M., Bodur, O., Rehor, J. and Marik, T. Towards Industry 5.0: Selected Papers from ISPR2022, Springer, pp. 176-187. DOI 10.1007/978-3-031-24457-5_15reposiTUm
2020
Precision in Additive Manufacturing, Optimization and Evaluation of the Accuracy of 3D Printer based on GPS System Bodur, O., Stepanek, V., Walcher, E. M. and Durakbasa, N. Proceedings of the 31st DAAAM International Symposium, DAAAM International, pp. 963-972. PDFDOI 10.2507/31st.daaam.proceedings.134reposiTUmCited by 12
2019
Additive Miniaturized-Manufactured Gear Parts Validated by Various Measuring Methods Durakbasa, M. N., Demircioglu, P., Bauer, J. M., Bögrekci, I., Bas, G., Bodur, O. and Poszvek, G. Proceedings of the 12th International Conference on Measurement and Quality Control: Cyber Physical Issue, Springer, pp. 276-290. DOI 10.1007/978-3-030-18177-2_25reposiTUmCited by 10
2019
Challenges of Miniaturizing a Precision Gear Durakbasa, M. N., Bauer, J. M., Bodur, O. and Poszvek, G. Proceedings of the International Symposium for Production Research 2018, Springer, pp. 239-253. DOI 10.1007/978-3-319-92267-6_21reposiTUmCited by 8

Book chapters 6

2022
Improving the Precision of an FDM 3D Printer with Compensation Technique Bodur, O., Sterca, D.-A., Sulz, C. and Walcher, E. M. Smart and Networked Manufacturing, Vol. 5, ed. F. Bleicher, pp. 109-113. reposiTUm
2022
Optimization of the Crankshaft Journal Bearings Efficiency Bodur, O., Çolak, Ü. Ö., Sterca, D.-A., Walcher, E. M., Cristian, L.-N. and Durakbasa, N. DAAAM International Scientific Book 2022, Vol. 21, pp. 97-106. PDFDOI 10.2507/daaam.scibook.2022.08reposiTUm
2021
Implementation of an Eco-Design Process to Minimize Negative Environmental Impacts - Case Study Bodur, O., Walcher, E. M., Durakbasa, N. and Sterca, D.-A. DAAAM International Scientific Book 2021, DAAAM International, pp. 117-130. PDFDOI 10.2507/daaam.scibook.2021.10reposiTUmCited by 1
2021
Evaluation of Fused Deposition Modeling Process Parameters Influence on 3D Printed Components by High Precision Metrology Sterca, D.-A., Calin, R.-A., Cristian, L., Walcher, E. M., Bodur, O., Ceclan, V., Grozav, S. D. and Durakbasa, N. M. Digitizing Production Systems, Springer, pp. 281-295. DOI 10.1007/978-3-030-90421-0_24reposiTUmCited by 5
2021
Digital-Body (Avatar) Library for Textile Industry Dönmezer, S., Durakbasa, N. M., Bas, G., Bodur, O., Walcher, E. M. and Güclü, E. Digitizing Production Systems, Springer, pp. 24-38. DOI 10.1007/978-3-030-90421-0_3reposiTUmCited by 1
2020
Intelligent Design and Advanced Precision Metrology on the Geometrical Structure of Medical Needles Based on GPS and ISO Standards Bodur, O., Poszvek, G., Walcher, E. M., Durakbasa, N. M. and Bauer, J. M. Digital Conversion on the Way to Industry 4.0, Springer, pp. 346-362. DOI 10.1007/978-3-030-62784-3_29reposiTUmCited by 3

Edited proceedings 2

2026
From Data-Driven Production to Autonomous Manufacturing Systems: Tagungsband zum 7. Wiener Produktionstechnik Kongress (WPK 2026) Bleicher, F., Bodur, O. and Trautner, T. F. (Eds.) ISBN 978-3-9505584-1-8, TU Wien, Institute of Production Engineering and Photonic Technologies. PDFDOI 10.5281/zenodo.22954665
2024
Twin Transition in Manufacturing: Wiener Produktionstechnik Kongress 2024 Bleicher, F., Bodur, O. and Trautner, T. F. (Eds.) Vol. 6, TU Wien, Institute of Production Engineering and Photonic Technologies. PDFDOI 10.5281/zenodo.13885006reposiTUm

Theses 2

2023
Generative design, evaluation and validation of additive miniaturized-manufactured components, based on GPS and quality standards, by high precision measurement technologies Bodur, O. Doctoral dissertation, TU Wien. PDFDOI 10.34726/hss.2023.113420reposiTUm
2014
Optimization of the crankshaft bearings and investigation of the ball bearing usage in the compressor of the refrigerator Bodur, O. Master's thesis, Yildiz Technical University. PDFDOI 10.5281/zenodo.11067851

Talks and posters 13

2026
Digital Transformation of Traditional Art: From 3D Scanning to Casting and Additive Manufacturing Bodur, O., Biegl, S., Konuk, B., Şener, B., Uçar, M., Poszvek, G., Prießnitz, M. and Bleicher, F. Poster, Zenodo, TU Wien, 11 May 2026. PDFDOI 10.5281/zenodo.20123327
2026
Smart manufacturing with 5G Supervised Autonomy Badhan, T. J., Bhupathiraju, S. S. M. K. V., Bodur, O. and Bleicher, F. Presentation, Industrie 5G & Dark Factory Showcase: Drei x ENGEL, TU Wien IFT TEC-Lab, Vienna, 11 June 2026. reposiTUm
2026
Towards Advanced Manufacturing Bleicher, F., Prießnitz, M., Wallner, B., Habersohn, C., Bodur, O., Kügerl, L., Greitler, J.-A., Wurm, F., Badhan, T., Zink, F. and Trautner, T. Presentation, Bilaterales Partnertreffen TU Wien IFT & Plansee SE 2026, Reutte, 8 May 2026. reposiTUm
2026
Von der datengetriebenen Fertigung zur Autonomen Fertigungszelle Bleicher, F., Wallner, B., Habersohn, C., Bodur, O., Badhan, T., Trautner, T. and Kügerl, L. Keynote, Intertool 2026, Wels, 22 April 2026. reposiTUm
2026
GIGABOT: 5G-enabled autonomous mobile robot to drive factory automation Bleicher, F., Bodur, O. and Poszvek, G. Presentation, Intertool 2026, Wels, 21 April 2026. reposiTUm
2026
Towards Advanced Manufacturing Cells Bleicher, F., Wallner, B., Habersohn, C., Bodur, O., Kügerl, L., Greitler, J.-A., Wurm, F., Badhan, T. J. and Trautner, T. Presentation, Plansee Meeting, Vienna, 10 April 2026. reposiTUm
2026
5G Networks in Europe’s Dark Factories Bleicher, F., Wallner, B., Habersohn, C., Bodur, O., Kügerl, L., Greitler, J.-A., Wurm, F., Badhan, T. and Trautner, T. Presentation, Event at TU Wien IFT with Drei and partners, Vienna, 12 February 2026. reposiTUm
2026
GigaBot: Towards Supervised Autonomy with 5G in Manufacturing Systems Badhan, T., Varma, K., Bodur, O. and Bleicher, F. Presentation, 7th Wiener Produktionstechnik Kongress (WPK 2026), Vienna, 7 October 2026. PDFDOI 10.5281/zenodo.23110577
2025
Zukunft der Automatisierung. Customizable Production - towards autonomous systems Bleicher, F., Trautner, T. F. and Bodur, O. Conference presentation, FESTO Innovation Day 2025, Zell am See, 16 September 2025. reposiTUm
2025
Seminar für Fertigungsmesstechnik und Qualitätssicherung FQS2025 Bleicher, F., Bodur, O., Poszvek, G. and Trautner, T. F. Conference presentation, FQS2025, Vienna, 18 March 2025. reposiTUm
2025
MX Machining Transformation: Data driven manufacturing Bleicher, F., Trautner, T. F., Habersohn, C., Kügerl, L., Greitler, J.-A. and Bodur, O. Conference presentation, 1st DMG MORI research conference, Nara, Japan, 13 March 2025. reposiTUm
2024
Development of HoloLase MD: Integrating AR Technology with Laser Protection for Healthcare 4.0 Bodur, O., Hohensulz, C., Einspieler, C., Poszvek, G. and Bleicher, F. Poster, 1st Science Day, Faculty of Mechanical and Industrial Engineering, TU Wien, Vienna, 21 February 2024. DOI 10.34726/5879reposiTUm
2024
3GPP Release 16 Indoor Positioning Solution in Private Standalone 5G Networks Bodur, O., Hohensulz, C., Pecherstorfer, M., Poszvek, G. and Bleicher, F. Poster, 1st Science Day, Faculty of Mechanical and Industrial Engineering, TU Wien, Vienna, 21 February 2024. DOI 10.34726/5759reposiTUm

Reports 4

2026
5G-basierter autonomer mobiler Roboter für Remote Work in der Fertigungsindustrie: Endbericht GigaBot Bodur, O., Spettel, S., Badhan, T. J., Bhupathiraju, S. S. M. K. V., Poszvek, G. and Bleicher, F. Final project report, FFG BBA2030. reposiTUm
2023
Innovationsscheck 896287: Entwicklung der AR-Laserschutzbrille (HoloLase MD) Bleicher, F., Bodur, O., Einspieler, C. and Sezer, U. FFG Innovation Cheque report. reposiTUm
2022
Innovationsscheck 891075: Konstruktion der AR-Laserschutzbrille (HoloLase) Bodur, O., Sulz, C., Bleicher, F., Einspieler, C. and Sezer, U. FFG Innovation Cheque report. reposiTUm
2022
Innovationsscheck mit Selbstbehalt: Endbericht und Endabrechnung Sulz, C., Bodur, O. and Einspieler, C. FFG Innovation Cheque report. reposiTUm