Integrating 5G-enabled mobile robotics for remote supervision in CNC machining via a virtualized frameworkBodur, O., Badhan, T., Demir, N., Bhupathiraju, S. S. M. K. V., Spettel, S. and Bleicher, F.CIRP Journal of Manufacturing Science and Technology, 71, 698-710.PDFDOI 10.1016/j.cirpj.2026.10.008
2026
Interfacial wetting behavior, tribological integrity, and antifouling functionality of h-BN/FEP nanocomposite coatings on stainless-steel heat exchanger surfacesDağlı, S., Özbey, M., Bodur, O. and Sarıkaya, M.Journal of Materials Research and Technology, 43, 2719-2733.PDFDOI 10.1016/j.jmrt.2026.06.267reposiTUm
2026
Influence of drilling parameters on hole quality in the aluminum alloy AA6013-T651Özsoy, N., Akşen, T. A., Bodur, O., Poszvek, G. and Özsoy, M.Materials Testing, 68(7), 1296-1310.PDFDOI 10.1515/mt-2026-0025reposiTUm2-mal zitiert
2026
Engineering Graphics Literacy and Manufacturing Performance: A Cross-National Mixed-Methods Study of CAD Competency Gaps, Standards Compliance Deficiencies, and Their Industrial ConsequencesSarıkaya, M., Karabulut, Ş., Bodur, O., Okyayuz, A. Ş., Boztunç Öztürk, N. and Dağlı, S.Applied Sciences, 16(10), 4771.PDFDOI 10.3390/app16104771reposiTUm1-mal zitiert
2026
Air pollution and meteorological factors significantly enhance solar radiation forecasting accuracy in the western Mediterranean region: a machine learning approachYilmaz, I., Kocer, A., Bodur, O. and Aksoy, E.Frontiers in Energy Research, 14, 1807361.PDFDOI 10.3389/fenrg.2026.1807361
2026
Evaluation of Dimensional Precision in FDM 3D-Printed Parts via Computed TomographyCraciun, R., Maxim, A., Muresan, V., Bodur, O., Walcher, E. M. and Poszvek, G.Acta Technica Napocensis, Series Applied Mathematics, Mechanics, and Engineering, 60(II).reposiTUm
2026
Integrated Study of Surface Roughness Parameters and Dimensional Accuracy in FDM 3D-PrintedRakos, P. G., Dan, I.-M., Walcher, E., Bodur, O. and Poszvek, G.Acta Technica Napocensis, Series Applied Mathematics, Mechanics, and Engineering, 69, 615-629.reposiTUm
2026
Microscopic Fiducial Markers for Industrial Metrology ApplicationsBleicher, F., Nacu, C., Bodur, O. and Poszvek, G.Acta Technica Napocensis, Series Applied Mathematics, Mechanics, and Engineering, 69, 397-403.reposiTUm
2026
A Critical Review on Hybrid Metal Additive Manufacturing and Post-Processing: Nickel-Based SuperalloysSarıkaya, M., Başcıl, D., Yıldırım, Ç. V., Şirin, Ş., Çelik, M., Şirin, E., Bodur, O., Kıvak, T. and Dağlı, S.Journal of Materials Research and Technology.PDFDOI 10.1016/j.jmrt.2026.10.253
Konferenzbeiträge 17
2026
Component-Driven Qualification of Recycled Polyamides for Additive Manufacturing in Automotive LightingBodur, O., Sarac, B., Kossik, P., Atılal, E., Ersözoğlu, G., Akyurt, H., Popp, R., Giray, T., Altun, F., Özkan, E. D. and Bleicher, F.7th Wiener Produktionstechnik Kongress (WPK 2026), extended abstract, Vienna.PDFDOI 10.5281/zenodo.23110583
2025
Integrating 5G-Enabled Robotics for Remote Supervision in Smart Factories: A Virtualized FrameworkBodur, O., Badhan, T. J., Bhupathiraju, S. S. M. K. V., Diaz, R., Wallner, B. J., Demirci, T., Spettel, S., Rotheneder, L., Belletti, R., Akkılıç, T. E., Nal, D., Egin, I. N., Poszvek, G. and Bleicher, F.Proceedings of the 13th UTIS International Congress on Machining, pp. 1-11.reposiTUm
2025
Hybrid Predictive Modelling of Surface Roughness in DMLS AlSi10Mg: Integrating Thermo-Mechanical Simulation and Optical Metrology on ISO 10791-7 ComponentsBodur, O., Kossik, P., Poszvek, G. and Bleicher, F.Proceedings of the 13th UTIS International Congress on Machining, pp. 1-12.reposiTUm
2025
Quality in Production and ServiceBodur, O., García, Á. M., Poszvek, G. and Durakbasa, N. M.Sustainable Green Conversion: Selected Papers from ISPR2024, Springer, pp. 509-531.DOI 10.1007/978-3-031-83583-4_36reposiTUm2-mal zitiert
2025
Towards Advanced Control of Manufacturing CellsBleicher, F., Wallner, B. J., Habersohn, C., Bodur, O., Kügerl, L., Greitler, J.-A., Wurm, F., Badhan, T. J. and Trautner, T. F.Proceedings of the 13th UTIS International Congress on Machining, Antalya.reposiTUm
2025
Optimization and Performance Evaluation of a Patient-Specific Subperiosteal Implant from Ti6Al4VWilling, B., Bodur, O., Poszvek, G., Grozav, S. D., Păcurar, R., Ceclan, V. and Şelariu, M.Sustainable Green Conversion: Selected Papers from ISPR2024, Springer, pp. 55-67.DOI 10.1007/978-3-031-83611-4_5reposiTUm
2024
Evaluation of 3GPP Release 16 Indoor Positioning in Private Standalone 5G NetworksHomayouni, S., Paier, M., Bodur, O., Pecherstorfer, M., Stangelmayer, G., Hohensulz, C., Schweeger, T. and Rehak, J.2023 IEEE 20th International Conference on Smart Communities (HONET), IEEE, pp. 13-17.DOI 10.1109/HONET59747.2023.10375065reposiTUm8-mal zitiert
2024
Advanced Quality Assurance of Additive Manufacturing Through Computed TomographyJałowiec, M., Walcher, E. M., Bodur, O., Poszvek, G., Klein, M. and Bayrakçıl, M. D.Industrial Engineering in the Industry 4.0 Era: Selected Papers from ISPR2023, Springer, pp. 179-199.DOI 10.1007/978-3-031-53991-6_14reposiTUm3-mal zitiert
2024
Characterization of Polyethylene Pipe Properties Through Advanced Metrology TechniquesBayrakçıl, M. D., Bodur, O., Klein, M., Walcher, E. M., Poszvek, G. and Jałowiec, M.Industrial Engineering in the Industry 4.0 Era: Selected Papers from ISPR2023, Springer, pp. 97-115.DOI 10.1007/978-3-031-53991-6_8reposiTUm1-mal zitiert
2023
Porosity Examination of Additive Manufactured Parts and Effects of Infill ParametersBodur, O., Walcher, E. M., Sterca, A., Sulz, C., Calin, R.-A., Durakbasa, N. M. and Bleicher, F.Procedia CIRP, 118, 643-648, 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering.PDFDOI 10.1016/j.procir.2023.06.110reposiTUm3-mal zitiert
2023
Quality Assurance of Composite GrindingBodur, O., Walcher, E. M., Brier, J., Krall, S., Bleicher, F., Sterca, A., Sauprigl, J. and Peherstorfer, H.Procedia CIRP, 118, 590-595, 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering.PDFDOI 10.1016/j.procir.2023.06.101reposiTUm2-mal zitiert
2023
Study of Improving Spur Gears with the Generative Design MethodCristian, L.-N., Bodur, O., Walcher, E. M., Grozav, S. D., Ceclan, V., Durakbasa, N. M. and Sterca, D.-A.Towards Industry 5.0: Selected Papers from ISPR2022, Springer, pp. 473-485.DOI 10.1007/978-3-031-24457-5_38reposiTUm5-mal zitiert
2023
Effects of Drag Finishing on a SLM-Manufactured Titanium Reconstruction PlateTica, D., Cosma, C., Bodur, O., Durakbasa, N. M., Grozav, S. D., Ceclan, V., Rehor, J., Sterca, D.-A. and Walcher, E. M.Towards Industry 5.0: Selected Papers from ISPR2022, Springer, pp. 462-472.DOI 10.1007/978-3-031-24457-5_37reposiTUm
2023
Research on Mechanical Characteristics of Parts Made of 316L Stainless Steel (Material) by Using Selective Laser Melting TechnologyKovacs, M., Pacurar, R.-I., Grozav, S., Durakbasa, N. M., Bodur, O., Rehor, J. and Marik, T.Towards Industry 5.0: Selected Papers from ISPR2022, Springer, pp. 176-187.DOI 10.1007/978-3-031-24457-5_15reposiTUm
2020
Precision in Additive Manufacturing, Optimization and Evaluation of the Accuracy of 3D Printer based on GPS SystemBodur, O., Stepanek, V., Walcher, E. M. and Durakbasa, N.Proceedings of the 31st DAAAM International Symposium, DAAAM International, pp. 963-972.PDFDOI 10.2507/31st.daaam.proceedings.134reposiTUm12-mal zitiert
2019
Additive Miniaturized-Manufactured Gear Parts Validated by Various Measuring MethodsDurakbasa, M. N., Demircioglu, P., Bauer, J. M., Bögrekci, I., Bas, G., Bodur, O. and Poszvek, G.Proceedings of the 12th International Conference on Measurement and Quality Control: Cyber Physical Issue, Springer, pp. 276-290.DOI 10.1007/978-3-030-18177-2_25reposiTUm10-mal zitiert
2019
Challenges of Miniaturizing a Precision GearDurakbasa, M. N., Bauer, J. M., Bodur, O. and Poszvek, G.Proceedings of the International Symposium for Production Research 2018, Springer, pp. 239-253.DOI 10.1007/978-3-319-92267-6_21reposiTUm8-mal zitiert
Buchkapitel 6
2022
Improving the Precision of an FDM 3D Printer with Compensation TechniqueBodur, O., Sterca, D.-A., Sulz, C. and Walcher, E. M.Smart and Networked Manufacturing, Vol. 5, ed. F. Bleicher, pp. 109-113.reposiTUm
2022
Optimization of the Crankshaft Journal Bearings EfficiencyBodur, O., Çolak, Ü. Ö., Sterca, D.-A., Walcher, E. M., Cristian, L.-N. and Durakbasa, N.DAAAM International Scientific Book 2022, Vol. 21, pp. 97-106.PDFDOI 10.2507/daaam.scibook.2022.08reposiTUm
2021
Implementation of an Eco-Design Process to Minimize Negative Environmental Impacts - Case StudyBodur, O., Walcher, E. M., Durakbasa, N. and Sterca, D.-A.DAAAM International Scientific Book 2021, DAAAM International, pp. 117-130.PDFDOI 10.2507/daaam.scibook.2021.10reposiTUm1-mal zitiert
2021
Evaluation of Fused Deposition Modeling Process Parameters Influence on 3D Printed Components by High Precision MetrologySterca, D.-A., Calin, R.-A., Cristian, L., Walcher, E. M., Bodur, O., Ceclan, V., Grozav, S. D. and Durakbasa, N. M.Digitizing Production Systems, Springer, pp. 281-295.DOI 10.1007/978-3-030-90421-0_24reposiTUm5-mal zitiert
2021
Digital-Body (Avatar) Library for Textile IndustryDönmezer, S., Durakbasa, N. M., Bas, G., Bodur, O., Walcher, E. M. and Güclü, E.Digitizing Production Systems, Springer, pp. 24-38.DOI 10.1007/978-3-030-90421-0_3reposiTUm1-mal zitiert
2020
Intelligent Design and Advanced Precision Metrology on the Geometrical Structure of Medical Needles Based on GPS and ISO StandardsBodur, O., Poszvek, G., Walcher, E. M., Durakbasa, N. M. and Bauer, J. M.Digital Conversion on the Way to Industry 4.0, Springer, pp. 346-362.DOI 10.1007/978-3-030-62784-3_29reposiTUm3-mal zitiert
Herausgegebene Tagungsbände 2
2026
From Data-Driven Production to Autonomous Manufacturing Systems: Tagungsband zum 7. Wiener Produktionstechnik Kongress (WPK 2026)Bleicher, F., Bodur, O. and Trautner, T. F. (Eds.)ISBN 978-3-9505584-1-8, TU Wien, Institute of Production Engineering and Photonic Technologies.PDFDOI 10.5281/zenodo.22954665
2024
Twin Transition in Manufacturing: Wiener Produktionstechnik Kongress 2024Bleicher, F., Bodur, O. and Trautner, T. F. (Eds.)Vol. 6, TU Wien, Institute of Production Engineering and Photonic Technologies.PDFDOI 10.5281/zenodo.13885006reposiTUm
Hochschulschriften 2
2023
Generative design, evaluation and validation of additive miniaturized-manufactured components, based on GPS and quality standards, by high precision measurement technologiesBodur, O.Doctoral dissertation, TU Wien.PDFDOI 10.34726/hss.2023.113420reposiTUm
2014
Optimization of the crankshaft bearings and investigation of the ball bearing usage in the compressor of the refrigeratorBodur, O.Master's thesis, Yildiz Technical University.PDFDOI 10.5281/zenodo.11067851
Vorträge und Poster 13
2026
Digital Transformation of Traditional Art: From 3D Scanning to Casting and Additive ManufacturingBodur, O., Biegl, S., Konuk, B., Şener, B., Uçar, M., Poszvek, G., Prießnitz, M. and Bleicher, F.Poster, Zenodo, TU Wien, 11. Mai 2026.PDFDOI 10.5281/zenodo.20123327
2026
Smart manufacturing with 5G Supervised AutonomyBadhan, T. J., Bhupathiraju, S. S. M. K. V., Bodur, O. and Bleicher, F.Vortrag, Industrie 5G & Dark Factory Showcase: Drei x ENGEL, TU Wien IFT TEC-Lab, Vienna, 11. Juni 2026.reposiTUm
2026
Towards Advanced ManufacturingBleicher, F., Prießnitz, M., Wallner, B., Habersohn, C., Bodur, O., Kügerl, L., Greitler, J.-A., Wurm, F., Badhan, T., Zink, F. and Trautner, T.Vortrag, Bilaterales Partnertreffen TU Wien IFT & Plansee SE 2026, Reutte, 8. Mai 2026.reposiTUm
2026
Von der datengetriebenen Fertigung zur Autonomen FertigungszelleBleicher, F., Wallner, B., Habersohn, C., Bodur, O., Badhan, T., Trautner, T. and Kügerl, L.Keynote, Intertool 2026, Wels, 22. April 2026.reposiTUm
2026
GIGABOT: 5G-enabled autonomous mobile robot to drive factory automationBleicher, F., Bodur, O. and Poszvek, G.Vortrag, Intertool 2026, Wels, 21. April 2026.reposiTUm
2026
Towards Advanced Manufacturing CellsBleicher, F., Wallner, B., Habersohn, C., Bodur, O., Kügerl, L., Greitler, J.-A., Wurm, F., Badhan, T. J. and Trautner, T.Vortrag, Plansee Meeting, Vienna, 10. April 2026.reposiTUm
2026
5G Networks in Europe’s Dark FactoriesBleicher, F., Wallner, B., Habersohn, C., Bodur, O., Kügerl, L., Greitler, J.-A., Wurm, F., Badhan, T. and Trautner, T.Vortrag, Event at TU Wien IFT with Drei and partners, Vienna, 12. Februar 2026.reposiTUm
2026
GigaBot: Towards Supervised Autonomy with 5G in Manufacturing SystemsBadhan, T., Varma, K., Bodur, O. and Bleicher, F.Vortrag, 7th Wiener Produktionstechnik Kongress (WPK 2026), Vienna, 7. Oktober 2026.PDFDOI 10.5281/zenodo.23110577
2025
Zukunft der Automatisierung. Customizable Production - towards autonomous systemsBleicher, F., Trautner, T. F. and Bodur, O.Konferenzvortrag, FESTO Innovation Day 2025, Zell am See, 16. September 2025.reposiTUm
2025
Seminar für Fertigungsmesstechnik und Qualitätssicherung FQS2025Bleicher, F., Bodur, O., Poszvek, G. and Trautner, T. F.Konferenzvortrag, FQS2025, Vienna, 18. März 2025.reposiTUm
2025
MX Machining Transformation: Data driven manufacturingBleicher, F., Trautner, T. F., Habersohn, C., Kügerl, L., Greitler, J.-A. and Bodur, O.Konferenzvortrag, 1st DMG MORI research conference, Nara, Japan, 13. März 2025.reposiTUm
2024
Development of HoloLase MD: Integrating AR Technology with Laser Protection for Healthcare 4.0Bodur, O., Hohensulz, C., Einspieler, C., Poszvek, G. and Bleicher, F.Poster, 1st Science Day, Faculty of Mechanical and Industrial Engineering, TU Wien, Vienna, 21. Februar 2024.DOI 10.34726/5879reposiTUm
2024
3GPP Release 16 Indoor Positioning Solution in Private Standalone 5G NetworksBodur, O., Hohensulz, C., Pecherstorfer, M., Poszvek, G. and Bleicher, F.Poster, 1st Science Day, Faculty of Mechanical and Industrial Engineering, TU Wien, Vienna, 21. Februar 2024.DOI 10.34726/5759reposiTUm
Berichte 4
2026
5G-basierter autonomer mobiler Roboter für Remote Work in der Fertigungsindustrie: Endbericht GigaBotBodur, O., Spettel, S., Badhan, T. J., Bhupathiraju, S. S. M. K. V., Poszvek, G. and Bleicher, F.Final project report, FFG BBA2030.reposiTUm
2023
Innovationsscheck 896287: Entwicklung der AR-Laserschutzbrille (HoloLase MD)Bleicher, F., Bodur, O., Einspieler, C. and Sezer, U.FFG Innovation Cheque report.reposiTUm
2022
Innovationsscheck 891075: Konstruktion der AR-Laserschutzbrille (HoloLase)Bodur, O., Sulz, C., Bleicher, F., Einspieler, C. and Sezer, U.FFG Innovation Cheque report.reposiTUm
2022
Innovationsscheck mit Selbstbehalt: Endbericht und EndabrechnungSulz, C., Bodur, O. and Einspieler, C.FFG Innovation Cheque report.reposiTUm
Kein Eintrag entspricht diesem Filter.
Darf ich Ihren Besuch mit Google Analytics zählen? Dabei werden Cookies gesetzt, und ich sehe, welche Seiten und Publikationen gelesen werden. Keine Werbung. Datenschutzerklärung