Osman Bodur
Portrait of Osman Bodur

Dr.techn. Osman Bodur, MSc.

Senior Scientist | R&D Project Manager

Institute of Production Engineering and Photonic Technologies, TU Wien

Research

Additive manufacturing

How accurate, how smooth and how dense is a printed part? I study the quality of additively manufactured components and how to predict it before printing.

Overview

Additive manufacturing builds parts layer by layer, which gives designers great freedom and metrologists new questions. Layer thickness, build orientation and process parameters all leave their mark on dimensions, surface texture and internal porosity.

My doctoral work at TU Wien dealt with generatively designed, miniaturised components made by additive manufacturing and their validation with high-precision measurement. Since then I have worked on porosity in printed parts, compensation of printer inaccuracy, surface roughness prediction for laser powder bed fusion and the qualification of recycled polymers for automotive lighting.

Topics

  • Dimensional accuracy of printed parts and its compensation
  • Surface roughness and its prediction
  • Porosity, examined with computed tomography
  • Generative design and miniaturised components
  • Processes: FDM, SLS, SLA, DMLS and SLM

Try it

On an inclined surface each layer leaves a step. If the steps form a sawtooth of height t cos α, the arithmetic mean roughness is Ra = t cos α / 4, where t is the layer thickness and α the angle between the surface and the build plate. The model ignores process effects such as partially melted powder, so real surfaces are rougher than it predicts, above all on steep walls.

Questions

How does layer thickness affect surface roughness?
In the geometric staircase model roughness grows in proportion to layer thickness: halving the layer thickness halves Ra on the same surface. Surfaces close to vertical are the smoothest, shallow slopes the roughest.
Can porosity be measured without destroying the part?
Yes. Computed tomography shows the pores inside a printed part and lets you relate them to infill pattern and process parameters.

Related projects

  • Sustain LightTech

    Advancing sustainable headlight manufacturing: recycled polyamides and additive manufacturing for automotive lighting.

    EUREKA and FFG, project manager

    Ongoing 2025 - 2027

Publications on this topic 18

2026
Component-Driven Qualification of Recycled Polyamides for Additive Manufacturing in Automotive Lighting Bodur, O., Sarac, B., Kossik, P., Atılal, E., Ersözoğlu, G., Akyurt, H., Popp, R., Giray, T., Altun, F., Özkan, E. D. and Bleicher, F. 7th Wiener Produktionstechnik Kongress (WPK 2026), extended abstract, Vienna. PDFDOI 10.5281/zenodo.23110583
2026
Digital Transformation of Traditional Art: From 3D Scanning to Casting and Additive Manufacturing Bodur, O., Biegl, S., Konuk, B., Şener, B., Uçar, M., Poszvek, G., Prießnitz, M. and Bleicher, F. Poster, Zenodo, TU Wien, 11 May 2026. PDFDOI 10.5281/zenodo.20123327
2026
Evaluation of Dimensional Precision in FDM 3D-Printed Parts via Computed Tomography Craciun, R., Maxim, A., Muresan, V., Bodur, O., Walcher, E. M. and Poszvek, G. Acta Technica Napocensis, Series Applied Mathematics, Mechanics, and Engineering, 60(II). reposiTUm
2026
Integrated Study of Surface Roughness Parameters and Dimensional Accuracy in FDM 3D-Printed Rakos, P. G., Dan, I.-M., Walcher, E., Bodur, O. and Poszvek, G. Acta Technica Napocensis, Series Applied Mathematics, Mechanics, and Engineering, 69, 615-629. reposiTUm
2026
A Critical Review on Hybrid Metal Additive Manufacturing and Post-Processing: Nickel-Based Superalloys Sarıkaya, M., Başcıl, D., Yıldırım, Ç. V., Şirin, Ş., Çelik, M., Şirin, E., Bodur, O., Kıvak, T. and Dağlı, S. Journal of Materials Research and Technology. PDFDOI 10.1016/j.jmrt.2026.10.253
2025
Hybrid Predictive Modelling of Surface Roughness in DMLS AlSi10Mg: Integrating Thermo-Mechanical Simulation and Optical Metrology on ISO 10791-7 Components Bodur, O., Kossik, P., Poszvek, G. and Bleicher, F. Proceedings of the 13th UTIS International Congress on Machining, pp. 1-12. reposiTUm
2025
Optimization and Performance Evaluation of a Patient-Specific Subperiosteal Implant from Ti6Al4V Willing, B., Bodur, O., Poszvek, G., Grozav, S. D., Păcurar, R., Ceclan, V. and Şelariu, M. Sustainable Green Conversion: Selected Papers from ISPR2024, Springer, pp. 55-67. DOI 10.1007/978-3-031-83611-4_5reposiTUm
2024
Advanced Quality Assurance of Additive Manufacturing Through Computed Tomography Jałowiec, M., Walcher, E. M., Bodur, O., Poszvek, G., Klein, M. and Bayrakçıl, M. D. Industrial Engineering in the Industry 4.0 Era: Selected Papers from ISPR2023, Springer, pp. 179-199. DOI 10.1007/978-3-031-53991-6_14reposiTUmCited by 3
2023
Porosity Examination of Additive Manufactured Parts and Effects of Infill Parameters Bodur, O., Walcher, E. M., Sterca, A., Sulz, C., Calin, R.-A., Durakbasa, N. M. and Bleicher, F. Procedia CIRP, 118, 643-648, 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering. PDFDOI 10.1016/j.procir.2023.06.110reposiTUmCited by 3
2023
Generative design, evaluation and validation of additive miniaturized-manufactured components, based on GPS and quality standards, by high precision measurement technologies Bodur, O. Doctoral dissertation, TU Wien. PDFDOI 10.34726/hss.2023.113420reposiTUm
2023
Study of Improving Spur Gears with the Generative Design Method Cristian, L.-N., Bodur, O., Walcher, E. M., Grozav, S. D., Ceclan, V., Durakbasa, N. M. and Sterca, D.-A. Towards Industry 5.0: Selected Papers from ISPR2022, Springer, pp. 473-485. DOI 10.1007/978-3-031-24457-5_38reposiTUmCited by 5
2023
Effects of Drag Finishing on a SLM-Manufactured Titanium Reconstruction Plate Tica, D., Cosma, C., Bodur, O., Durakbasa, N. M., Grozav, S. D., Ceclan, V., Rehor, J., Sterca, D.-A. and Walcher, E. M. Towards Industry 5.0: Selected Papers from ISPR2022, Springer, pp. 462-472. DOI 10.1007/978-3-031-24457-5_37reposiTUm
2023
Research on Mechanical Characteristics of Parts Made of 316L Stainless Steel (Material) by Using Selective Laser Melting Technology Kovacs, M., Pacurar, R.-I., Grozav, S., Durakbasa, N. M., Bodur, O., Rehor, J. and Marik, T. Towards Industry 5.0: Selected Papers from ISPR2022, Springer, pp. 176-187. DOI 10.1007/978-3-031-24457-5_15reposiTUm
2022
Improving the Precision of an FDM 3D Printer with Compensation Technique Bodur, O., Sterca, D.-A., Sulz, C. and Walcher, E. M. Smart and Networked Manufacturing, Vol. 5, ed. F. Bleicher, pp. 109-113. reposiTUm
2021
Evaluation of Fused Deposition Modeling Process Parameters Influence on 3D Printed Components by High Precision Metrology Sterca, D.-A., Calin, R.-A., Cristian, L., Walcher, E. M., Bodur, O., Ceclan, V., Grozav, S. D. and Durakbasa, N. M. Digitizing Production Systems, Springer, pp. 281-295. DOI 10.1007/978-3-030-90421-0_24reposiTUmCited by 5
2020
Precision in Additive Manufacturing, Optimization and Evaluation of the Accuracy of 3D Printer based on GPS System Bodur, O., Stepanek, V., Walcher, E. M. and Durakbasa, N. Proceedings of the 31st DAAAM International Symposium, DAAAM International, pp. 963-972. PDFDOI 10.2507/31st.daaam.proceedings.134reposiTUmCited by 12
2019
Additive Miniaturized-Manufactured Gear Parts Validated by Various Measuring Methods Durakbasa, M. N., Demircioglu, P., Bauer, J. M., Bögrekci, I., Bas, G., Bodur, O. and Poszvek, G. Proceedings of the 12th International Conference on Measurement and Quality Control: Cyber Physical Issue, Springer, pp. 276-290. DOI 10.1007/978-3-030-18177-2_25reposiTUmCited by 10
2019
Challenges of Miniaturizing a Precision Gear Durakbasa, M. N., Bauer, J. M., Bodur, O. and Poszvek, G. Proceedings of the International Symposium for Production Research 2018, Springer, pp. 239-253. DOI 10.1007/978-3-319-92267-6_21reposiTUmCited by 8
All 37 publications, talks and reports