Osman Bodur
Portrait of Osman Bodur

Dr.techn. Osman Bodur, MSc.

Senior Scientist | R&D Project Manager

Institute of Production Engineering and Photonic Technologies, TU Wien

Research

Integrated quality assurance

Measuring is half the work. Quality assurance decides what a measured value means for the part and for the process, and feeds that decision back into production.

Overview

Integrated quality assurance treats measurement, evaluation and reaction as one system. A measured value is recorded, compared with the specification and turned into a decision: accept the part, correct the process or look for the cause.

Statistical quality assurance provides the tools for that decision: process capability indices such as Cp and Cpk, control charts, and measurement system analysis, which shows whether a measuring system can resolve the variation it is meant to monitor. I teach quality management at TU Wien; before my research career I worked as a project and quality engineer at a supplier of Mercedes-Benz buses.

Process-integrated quality assurance moves these checks closer to the machine: measurements in the process, at the machine and in the cell, linked by computer-aided quality (CAQ) and product and manufacturing information (PMI). A digital twin of the quality task keeps each measured value attached to the part and its nominal model. Without measured data, a twin is only a model.

Topics

  • Integrated and process-integrated quality assurance
  • Statistical quality assurance: process capability (Cp, Cpk) and control charts
  • Measurement system analysis and measurement uncertainty
  • Computer-aided quality (CAQ) and product and manufacturing information (PMI)
  • Digital twin of the quality assurance task
  • Quality assurance of additively manufactured parts with computed tomography

Try it

Move the sliders to change the spread and the position of the process. Cp compares the width of the tolerance with six standard deviations of the process. Cpk also takes the position of the mean into account and looks at the nearer tolerance limit. Many customers ask for a Cpk of at least 1.33; a centred process with this value leaves about 63 parts per million outside the tolerance.

Questions

What is the difference between Cp and Cpk?
Cp compares the width of the tolerance with the spread of the process and ignores where the process sits. Cpk measures the distance from the mean to the nearer tolerance limit in units of three standard deviations. A process with a high Cp can still produce scrap if it is off-centre, and Cpk shows this.
What does integrated quality assurance mean?
Measurement, evaluation and reaction work as one system. A measured value is not only stored, it is compared with the specification and used to correct the process, ideally before the next part is made.

Publications on this topic 6

2026
Influence of drilling parameters on hole quality in the aluminum alloy AA6013-T651 Özsoy, N., Akşen, T. A., Bodur, O., Poszvek, G. and Özsoy, M. Materials Testing, 68(7), 1296-1310. PDFDOI 10.1515/mt-2026-0025reposiTUmCited by 2
2025
Quality in Production and Service Bodur, O., García, Á. M., Poszvek, G. and Durakbasa, N. M. Sustainable Green Conversion: Selected Papers from ISPR2024, Springer, pp. 509-531. DOI 10.1007/978-3-031-83583-4_36reposiTUmCited by 2
2025
Seminar für Fertigungsmesstechnik und Qualitätssicherung FQS2025 Bleicher, F., Bodur, O., Poszvek, G. and Trautner, T. F. Conference presentation, FQS2025, Vienna, 18 March 2025. reposiTUm
2024
Advanced Quality Assurance of Additive Manufacturing Through Computed Tomography Jałowiec, M., Walcher, E. M., Bodur, O., Poszvek, G., Klein, M. and Bayrakçıl, M. D. Industrial Engineering in the Industry 4.0 Era: Selected Papers from ISPR2023, Springer, pp. 179-199. DOI 10.1007/978-3-031-53991-6_14reposiTUmCited by 3
2023
Quality Assurance of Composite Grinding Bodur, O., Walcher, E. M., Brier, J., Krall, S., Bleicher, F., Sterca, A., Sauprigl, J. and Peherstorfer, H. Procedia CIRP, 118, 590-595, 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering. PDFDOI 10.1016/j.procir.2023.06.101reposiTUmCited by 2
2023
Generative design, evaluation and validation of additive miniaturized-manufactured components, based on GPS and quality standards, by high precision measurement technologies Bodur, O. Doctoral dissertation, TU Wien. PDFDOI 10.34726/hss.2023.113420reposiTUm
All 37 publications, talks and reports